Best Buy Kitchenaid : Kitchenaid Bottom Freezer Refrigerator Not Cooling

How to reset the ice maker of kitchenaid refrigerator. Is the cooling function turned on?

Whirlpool 10 Cu. Ft. BottomFreezer BuiltIn Refrigerator

The fan motor could be overheating shortly after it starts operating and thus, not circulating air.

Kitchenaid bottom freezer refrigerator not cooling. The evaporator fan motor draws air over the evaporator coils and circulates it throughout the freezer. Ad find deals on products on amazon. My kitchenaid refrigerator/freezer ksss48qjx00 will cool for 2 days and then gets too warm.

Now it is open, but the air flow is not very high. The refrigerator could also accidentally be turned off during routine cleaning. If everything works, the unit will shut down and 01 will appear on the display.

Hold the two buttons on the touch pad down on the left and wait for a 3,2,1 countdown. To determine if the start capacitor is defective, test it with a multimeter. Here's the defrost thermostat for your model, it clips on the top of the evaporator coil:

Sometimes you can even smell the paint. The condenser fan motor is located underneath the. Browse & discover thousands of brands.

If the start capacitor is defective, replace it. Read customer reviews & find best sellers To reset the ice maker of a kitchenaid refrigerator, do the following:

Some refrigerators need to be manually turned back on after a power outage or power surge. Locate the vents in both the freezer and refrigerator compartments and ensure that there is nothing blocking the air flow. On the door jamb, there is a plastic tab.

Turn on the manual switch of the ice maker. If the refrigerator is not cooling properly, check to make sure the refrigerator is turned on. I have checked for ice on the cooling fins inside, replaced the defrost timer, replaced the starter relay and cleaned the compressor coils.

Another issue could be with the condenser fan. If the start capacitor isn’t working, the compressor may not start. If the evaporator fan motor is not working, the freezer will not cool.

Read customer reviews & find best sellers If it were getting the power it should be getting and stuck you would not be able to hold your hand on the top due to the heat. A new refrigerator may take up to 24 hours to reach optimal temperature after initial installation.

The condenser fan motor draws air over the condenser coils to cool them. On most refrigerators, the fan motor will not run when the door is open. As a result, the refrigerator will not cool.

Freezer will go to 5 degrees then up to 35 degrees and stay there. Another possible problem is a bad evaporator fan motor, which circulates the air from the freezer to the refrigerator. This video from sears partsdirect explains how to troubleshoot problems with your refrigerator when it's not cooling, including checking for frost buildup and faulty components such as the evaporator fan, the compressor and the temperature sensor.

Unplug the refrigerator first before ohm testing both parts! If the freezer vent is blocked, cold air will be trapped in the freezer and the freezer might be too cold. One of the main reasons for fridge not cooling but freezer works is that the evaporator coils are not working in proper order.

From there, the keys on the touch pad become soft keys. Browse & discover thousands of brands. Call around and try to find a repair shop that replaces compressors.

Remove and replace those parts on the side of the compressor. Hit the up or down arrows to go to. The evaporator coils are filled with frost, so air doesn’t get space to pass through them to get cold.

If the refrigerator is still not cool after 24 hours, contact the appliance store or service center where the refrigerator was purchased for assistance. Ad find deals on products on amazon. To check the evaporator fan motor, open the freezer door and then manually activate the freezer door switch.

For a fridge not to be cooling, you should think of ma many things, having no gas, brokerage of the filter drier, the fan and many others depending on the fridge type, but its better you call a technician for precise check and they will give you t. If the refrigerator is not cold enough there might be something caught in the condenser fan motor blade, or the condenser fan motor might be defective. Left this for a minute and then slide both freezer and refrigerator to coldest temp, however, the damper stayed closed (no air) for 5 minutes.

If vents are blocked, airflow will decrease.

GE 33 in. W 22.7 cu. ft. French Door Refrigerator in